Алкидная смола средней жирности ETERKYD 2109-M-55

Описание
Алкидная смола средней жирности ETERKYD 2109-M-55 ... an unusually fast air-drying medium-oil soybean alkyd resin with excellent color retention, good enamel stability and good hardness are required.

Свойства
Быстрой сохнет на воздухе.
Показывает отличную жесткость и прочность на открытом воздухе
Очень хороший цвет и цветостойкость
Обеспечивает хорошую устойчивость пленке от воды, масла и бензина
Имеет хорошую совместимость с хлорированной смолой

Применение
with good properties of quick air-drying to hard and color-retentive film; and remains good stability in the can. Brush or spray industrial air-drying primers and enamels. Farm and implement enamels. Trim paints.

Спецификация

Percent solids (±1%)	55
Solvent	mineral spirits
Viscosity, Gardner-Holdt at 25C°	X-Z(55% in mineral spirits)
Stokes at 25C°	13-23
Acid value (mg KOH/g, solids)	10 max.
Color, Gardner ('63)	7 max.
PA content, %	33
Oil length, %	44

TYPICAL PERFORMANCE DATA
Compatibility :
Refined Linseed Oil Limited
Bodied Oils Limited
Urea and Melamine Resin Compatible
Nitrocellulose Limited
Nitrocellulose Good
Pigments Very good
Dier Recommendations :
(Metal based on vehicle solids)
Air dry 0.02-0.05% Co
0.00-0.05% Ca
0.20-0.50 Pb
Air Drying Date :
(Reduced to 45% solids; 3.0 mil wet films; dried at 50% relative humidity 25C° with
0.4% Pb and 0.05% Ca.)
Set-to-touch 20-30
Zapon-500 gram, hrs 3.0-4.0

SUGGESTED FORMULATIONS

Rutile Titanium Dioxide 18.7
Calcium Carbonate 7.2
ETERKYD 2109-M-55 53.0
--------------------------------------------------------------------------
ETERKYD 2109-M-55 19.0
12% Cobalt Naphthenate 0.2
32% Lead Naphthenate 0.5
5% Calcium Naphthenate 0.3
Antiskinning Agent 0.1
Mineral Spirits 1.0
Total 100.0